What is the coverage area for a 2.5L tin?
Coverage typically depends on the porosity and condition of the wood, but as a general guide, 2.5 litres should cover approximately 10-12 square metres per coat on smooth, planed timber.
Does it require a primer or undercoat?
No, this is a combined stain and treatment that can be applied directly to bare, clean wood. For previously treated surfaces, ensure they are properly prepared and clean.
How long does it take to dry?
Drying times vary with weather conditions, but it is typically touch dry in 2-4 hours. A full cure and readiness for foot traffic is usually achieved within 24 hours.
Can it be used on other outdoor wood besides decking?
While specifically formulated for decking, it can be used on other exterior timber surfaces like garden furniture or fences where anti-slip properties and algae protection are desired.
How do I prepare the decking before application?
The surface must be clean, dry, and free from dirt, algae, and old flaking finishes. A stiff brush and, if necessary, a specialist deck cleaner should be used. Allow the wood to dry completely.
How many coats are recommended?
For optimal colour and protection, two coats are generally recommended. Apply the first coat, allow it to dry completely as per the instructions, then apply the second.
Is it safe for plants and pets once dry?
Once fully cured, the treated surface is safe. However, during application and drying, keep pets and children away, and avoid contact with surrounding plants. Always follow the manufacturer's safety instructions.